Hybrid Eaton Fuller Gudbinta Babaca Code 114 – Inverter Power Supply

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The Inverter assembly uses a 12V or 24V supply provided from the Hybrid Control Module (Gudiga sare) to power the Internal Control Board. The HCM provides ignition power to the Internal Control Board after it completes the power-up self-check.

khalad Code 114 – Inverter Power Supply Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Control Module Hybrid (Gudiga sare) danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 3 ayaa lagu wadaa markii danab suuroggalaan Inverter ka wada weyn yahay 16 volts waayo, 0.5 seconds.
  • IMF 4 ayaa lagu wadaa markii danab suuroggalaan Inverter uu ka yar yahay 7 volts waayo, 0.1 seconds.

Uugu Marka Babaca Code 114 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Electric Motor / Generator la taageero iyo noolaynta naafada ah; si kastaba ha ahaatee, Relays a high-voltage sii powered.
  • Gudiga sii si loo xakameeyo gaariga hybrid ah in hab naaftada kaliya.
  • la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 1
    • Inverter
  • IMF 3
    • Inverter
  • IMF 4
    • Gudiga sare
    • Inverter
    • Power suunka sahayda ka HCM si Inverter

khalad Code 114 – Inverter Power Supply Test

Qeybta Aqoonsiga MY08 Systems:

HCM - Hybrid System Interface Connector

La habeeyo Front View
(Gudiga sare – Hybrid System Wajahadda isku xira)

Inverter 56-Way Mating Connector View

Inverter 56-Jidka isku xira rimay View
(Inverter – Isku xira danab Low)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

HCM to Inverter connector for Eaton Fuller transmission

Qeybta Aqoonsiga MY09 Systems:

HCM - Hybrid System Interface Connector

La habeeyo Front View
(Gudiga sare – Hybrid System Wajahadda isku xira)

Duetsch 40-way mating connector view

Deutsch 40-Jidka isku xira rimay View
(Inverter – Isku xira danab Low)

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

HCM to Inverter connector location for Fuller transmission MY09

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan iyo oofin korontada Pretest

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
  3. Qabtaan Pretest korontada ku:
    • Haddii arrimaha laguma arag inta lagu guda jiro Pretest korontada ku, tag Tallaabada 2.
    • Haddii arrinta waxaa cusboonaysiiyey inta lagu guda jiro Pretest korontada ku, baaritaanka waa complete. Tag Tallaabada 5.

STEP 2. Hubi joogo FMI.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
  2. Key off.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  3. Waa kuwee FMIs joogaan?
    • Haddii FMI 1 waxaa ku qoran, bedeli Inverter ah.
    • Haddii Babaca Code 114 IMF 3 ama 4 waxaa ku qoran, tag Tallaabada 3.
    • Haddii Babaca Code 114 ma joogo, baaritaanka waa complete. Tag Tallaabada 5.

STEP 3. Hubi joogo danab at Inverter.

  1. Key off.
  2. Barkinta Inverter ee 56-Jidka isku xira (MY08) 40-isku xira Jidka (MY09).
  3. Connect multimeter ah inay isku xira Inverter 56-Jidka Pin 15 iyo Pin 1 (MY08) 40-Jidka isku xira Pin 1 iyo Pin 6. (MY09).
  4. multimeter Place meel laga arki karaa inta soo socda taagan in gaari xamuul ah.
  5. Key on.
  6. Waxaad dhawrtaa multimeter reading danab:
    Note: Gently flex the Inverter 56-Way Connector Harness near the connector while monitoring the voltage reading.

    • Haddii danab waa 11-13 volts (on nidaamka 12-volt a) ama 23- 25 volts (on nidaamka 24-volt a), bedeli Inverter ah, ka dibna tag Tallaabada 5.
    • Haddii danab waa ka weyn yahay 16 volts (on nidaamka 12-volt a) ama 32 volts (on nidaamka 24-volt a), dayactiro baabuurta nidaamka xukun 12-volt ah. U dir ka OEM ee nidaamka dayactirka.
    • Haddii danab waa ka baxsan kala duwan, tag Tallaabada 4.

STEP 4. Hubi sii wareeggeedii u dhexeeya Gudiga la habeeyo iyo Inverter.

  1. Key off.
  2. Barkinta cable ka batari negative.
  3. Disconnect the HCM System Harness 38- jidka isku xira.
  4. Cabir iska caabin ah oo ka socda:
    • Inverter 56-Jidka isku xira Pin 15 to HCM 38- Jidka isku xira Pin 2 (MY08). Inverter 40-Way Connector Pin 1 to HCM 38-Way Connector Pin 2 (MY09).
    • Inverter 56-Jidka isku xira Pin 1 si ay dhulka (MY08) Inverter 40-Way Connector Pin 6 si ay dhulka (MY09).
      • Haddii iska caabin ka Pin 15 in Pin 2 (MY08) ama Pin 1 in Pin 2 (MY09) waa 0 si ay u 0.3 ohms iyo iska caabin ka Pin 1 si ay dhulka waa 0 si ay u 0.3 ohms, bedeli Control Module ku Hybrid (Gudiga sare). Tag Tallaabada 5.
      • Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo furan ee Power ama Ground la habeeyo, ka dibna tag Tallaabada 5.

STEP 5. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 114 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 114 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US