Hybrid Eaton Fuller Gudbinta Babaca Code 115 – Heerkulka Inverter

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. Sensor Heerkulka Inverter waa thermistor ah oo ku yaalla gudaha Inverter in ay isbedesho in qiimaha ku saleysan heerkulka. Inverter ayaa siisa danab tixraaca 5-volt a in shidma iyo cabiraya dhibic volt ee Bannaanka ka.

Marka heerkulka Inverter waa diiran iska caabin shidma ay yar tahay iyo Inverter ku ogaadaa yar-danab (0.1 volts uyeelaysaan 260 ° F [127 ° C]). Marka Motor / Generator waa qabow iska caabin shidma yahay sare iyo Inverter ku ogaadaa a high-voltage (4.0 volts siman -68 ° F [-56 ° C]).

khalad Code 115 – Ogaanshaha Heerkulka Inverter

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • danab suuroggalaan Inverter waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 2 ayaa lagu wadaa markasta / DC signal warcelin danab DC akhriya ka weyn tahay 15 volts ama ka yar 10 mode volts iyo ePTO ayaa ku hawlan.
  • IMF 4 ayaa lagu wadaa haddii warcelin danab uu ka yar yahay 15 volts iyo ka weyn 10 volts iyo farqiga u dhexeeya warcelin danab iyo danab batari gaari ka wada weyn yahay 0.5 volts waayo, 1 labaad ama ka badan.

Uugu Marka Babaca Code 115 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Electric Motor / Generator la taageero iyo noolaynta naafada ah; si kastaba ha ahaatee, Relays a high-voltage sii powered.
  • Gudiga sii si loo xakameeyo gaariga hybrid ah in hab naaftada kaliya.
  • la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 0
    • Inverter
    • nidaamka qaboojinta Liquid (coolant hooseeyo, ma socodka coolant, saar Coolant, hiitarka, hiitarka Fan, kaydka)

khalad Code 115 – Inverter Test Heerkulka

STEP 1.Verify Inverter heerkulka.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira.
    Danger: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  3. Key on.
  4. Select the Data Monitor option and view PID 120 Heerkulka Inverter ee liiska "Power Electronics".
  5. Waxaad dhawrtaa PID 120 mar kale ka dib markii 20 daqiiqo.
    • Haddii PID 120 Heerkulka Inverter hoos ka horeysay si reading labaad, tag Tallaabada 2.
    • Haddii PID 120 Heerkulka Inverter hadhay joogto ah, bedeli Inverter ah, ka dibna tag Tallaabada 8.

STEP 2. Hubi heerka coolant System Hybrid.

  1. Key off
  2. La soco marka heerka coolant ka dib markii nidaamka ayaa qaboojiyey si ay u arkaan haddii ay ka dheregsan yahay heerka ku habboon:
    • Haddii coolant waa xadka lagu taliyay, tag Tallaabada 3.
    • Haddii coolant waa hoos xadka lagu taliyay, tixraac OEM nooca coolant iyo nidaamka ka dheregtaan, ka dibna tag Tallaabada 8.

STEP 3. Hubi daacad ah qaybaha System Qaboojinta Hybrid.

  1. Arag baadho Liquid ku Hybrid qaboojinta System hiitarka for qashin ama wax ka badela hawada iyo kormeerto khadadka coolant waayo qallooca fiiqan ee:
    • Haddii hiitarka waa free of qashin iyo khadadka coolant la isku jabantahay, tag Tallaabada 4.
    • Haddii hiitarka waxaa ka buuxa qashin, hawada ah la dhexgalo ama khadadka coolant waxaa jabantahay. Dayactir walaac ah, ka dibna tag Tallaabada 8.

STEP 4. Hubi hawlgalka saar Coolant nidaamka hybrid.

  1. Key on.
  2. Connect ServiceRanger u xira 9-Way ku cab ah.
  3. Dooro Functions Product Advanced xulashada iyo dooro ikhtiyaarka "Qaboojinta saar".
  4. In loo sahlo soo qaboojinta doorasho saar:
    • Haddii saar Coolant jirsado on, tag Tallaabada 5.
    • Haddii saar Coolant ay ku guul daraysato in ay soo jeedin on, tag Tallaabada 6.

STEP 5. Hubi Hybrid hawlgalka System Heat Iskubedelka Fan.

  1. Dooro Functions Product Advanced xulashada iyo dooro "Heat Iskubedelka Fan" option.
  2. In loo sahlo xulashada Heat Iskubedelka Fan.
    • Haddii Iskubedelka Heat ee Fan sano, nidaamka loo baahan yahay in la nadiifiyey hawada si loo suurtogeliyo in coolant in ay soo qulquli. Dhiig hawada iyadoo la isticmaalayo qalab cadaadis nidaamka coolant ama qalab vacuum ah, ka dibna tag Tallaabada 8.
    • If the Heat Exchanger Fan fails to turn on, tag Tallaabada 7.

STEP 6. Hubi danab at Hybrid saar Coolant System.

  1. Key on.
  2. Barkinta ka Coolant saar 2-jidka isku xira.
  3. Dooro Functions Product Advanced xulashada iyo dooro ikhtiyaarka "Qaboojinta saar".
  4. In loo sahlo soo qaboojinta doorasho saar.
  5. Cabir danab ee 2-jidka isku xira ka Pin A si Pin B.
    • Haddii danab dhexeeya musmaarradii A iyo B waa ± 0.2 volts ee danab batari, tixraac OEM walaac saar Coolant.
    • Haddii danab dhexeeya Pin A iyo B Pin waa ka baxsan kala duwan, tixraac OEM nidaamka dayactirka muusiqada saar Power la habeeyo.

STEP 7. Hubi danab at System Hybrid Heat Iskubedelka Fan.

  1. Key on.
  2. Barkinta ka Heat Iskubedelka Fan 2-jidka isku xira.
  3. Dooro Functions Product Advanced xulashada iyo dooro "Heat Iskubedelka Fan" option.
  4. In loo sahlo xulashada Heat Iskubedelka Fan.
  5. Cabir danab ee 2-jidka isku xira ka Pin A si Pin B:
    • Haddii danab dhexeeya musmaarradii A iyo B waa ± 0.2 volts ee danab batari, tixraac OEM walaac Heat Iskubedelka Fan.
    • Haddii danab dhexeeya Pin A iyo B Pin waa ka baxsan kala duwan, tixraac OEM nidaamka dayactirka Heat Iskubedelka Fan Power la habeeyo.

STEP 8. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 115 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 115 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US