Hybrid Eaton Fuller Gudbinta Babaca Code 83 – Baadil Shifter Range

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The Unit Gudbinta Electronic Control (TECU) waxaa ku xiran qalab shaqada, taas oo soo diro xog doorashada hab darawalka. The qalabka wareejin socon oo keliya waa loosoo Control Shift Button ah Eaton® (PBSC) iyo OEM bixisey lever wareeg (haddii qalabaysan park). TECU The hubinaysaa gaariga nooca qalab wareejin inta lagu jiro kor ugu horeysay ee awoodda.

khalad Code 83 – Baadil Shifter Range Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • TECU danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • System TECU Battery Low danab Babaca waa qabad la'aan.
  • TECU la shaqeeya ilaa markii ugu horeysay oo qalab wareejin lahayn ayaa loo qaybiyay.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • khalad Code 83 ayaa lagu wadaa markii voltages shidma siyaado ah aadan ku raacsanayn.

Uugu Marka Babaca Code 83 ayaa lagu wadaa shuruudaha soo socda dhici:

  • "F" u muuqataa in qaab marsho ah.
  • Gaf waxa lagu kaydiyaa xasuusta TECU.
  • TECU badala in "AutoShift" control.
  • Engine ma kumbyuutarradeedu.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 12, 13
    • dareemayaal khaldan
    • la habeeyo
    • TECU

khalad Code 83 – Range Test aan saxnayn Shifter

Aqoonsiga Qeybta:

TECU - Vehicle Interface Connector

La habeeyo Front View
(TECU – Vehicle Wajahadda isku xira)

4-Pin Park Pawl Actuator Connector

4-Pin Park Pawl leewarka isku xira

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

TECU Park Pawl Actuator

STEP 1. Hubi danab sahayda lagu baddalo Lever.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Disconnect the 4-Way Connector to the Park Pawl Actuator.
  3. Key on.
  4. Hubi sahayda 12-volt ee 4-Jidka isku xira ee Pin 1 iyo Pin 2:
    • Haddii danab dhexeeya Pin 1 iyo Pin 2 waa ± 0.2 volts ee danab batari, tag Tallaabada 2.
    • Haddii danab ka baxsan kala duwan ee, tag Tallaabada 4.

STEP 2. Hubi danab lagu baddalo Lever meel marsho dhexdhexaad ah.

  1. Iyada oo lever leewarka / wareeg ee booska danab ku jeeg Dhexdhexaad on biinanka:
    • pin 3 si ay dhulka
    • pin 4 si ay dhulka
      • Haddii cabbirka u dhaxaysa 2.25-2.75 volts, tag Tallaabada 3.
      • Haddii danab ka baxsan kala duwan ee, bedeli shidma Hannaanka Park Pawl, ka dibna tag Tallaabada 4.

STEP 3. Hubi sii wareeggeedii Lever Shift in Vehicle la habeeyo.

  1. Barkinta la habeeyo TECU 38-Jidka isku xira.
  2. Hubi joogtada u dhaxaysa:
    • 38-Jidka isku xira Pin 15 iyo 4-Jidka isku xira Pin 4
    • 38-Jidka isku xira Pin 16 iyo 4-Jidka isku xira Pin 3
      • Haddii sii waa okay, bedeli Unit Gudbinta Electronic Control ah (TECU), ka dibna tag Tallaabada 5.
  3. Haddii furan waxaa laga helaa, dayactirayo ama lagu badalayo la habeeyo ah, ka dibna tag Tallaabada 5.

STEP 4. Hubi sii wareeggeedii Lever Shift in Vehicle la habeeyo.

  1. Disconnect the TECU Vehicle Harness 38- jidka isku xira.
  2. Hubi joogtada u dhaxaysa:
    • 38-Jidka isku xira Pin 17 iyo 4-Jidka isku xira Pin 1
    • 38-Jidka isku xira Pin 31 iyo 4-Jidka isku xira Pin 2
      • Haddii sii waa okay, bedeli Unit Gudbinta Electronic Control ah (TECU), ka dibna tag Tallaabada 5.
      • Haddii furan waxaa laga helaa, dayactirayo ama lagu badalayo la habeeyo ah, ka dibna tag Tallaabada 5.

STEP 5. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 83 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 83 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US