Hybrid Eaton Fuller Gudbinta Babaca Code 86 – Battery danab Sare 2 heerkulka

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, EH-8E306A-T and EH-6E606B-CD. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The baytariyada a high-voltage yihiin 172 volts kasta oo ku xiran yihiin ee taxanahan in ay soo saaraan 340 volts DC. The Unit Control Battery, oo ku yaalla Box Relay ah, isgaarsiin la batari kasta si loo ogaado heerkulka, State Of Charge (GOS) iyo danab. Macluumaadkan waxaa ka dibna soo diray in Inverter ah.

khalad Code 86 – Battery danab Sare 2 Ogaanshaha heerkulka

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • danab suuroggalaan Inverter waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • Control Unit Battery danab suuroggalaan waa ka weyn yahay 7 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 0 ayaa lagu wadaa markii BCU ku ogaadaa a high-voltage heerkulka batari waa ka weyn yahay 70 ° C for 6.4 seconds. IMF 16 ayaa lagu wadaa markii BCU ku ogaadaa a high-voltage heerkulka batari waa ka weyn yahay 60 ° C for 6.4 seconds.

Uugu Marka Babaca Code 86 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa xasuusta HCM.
  • Inverter xidho nidaamka a high-voltage off.
  • Gudiga sii si loo xakameeyo gaariga hybrid ah in hab naaftada kaliya.
  • la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 0
    • PEC
    • Battery Fan
    • Battery Fan Air Filter
    • Battery Fan Relay Power Supply la habeeyo
    • Battery Fan Relay
    • Battery Fan Qiiqa Screen

khalad Code 86 – Battery danab Sare 2 Imtixaanka heerkulka

Qeybta Aqoonsiga MY08 Systems:

HCM - Hybrid System Interface Connector

La habeeyo Front View
(Gudiga sare – Hybrid System Wajahadda isku xira)

PEC - Low Voltage Connector for Eaton Fuller transmission

PEC – Isku xira danab Low

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

HCM Battery Fan Relay PEC Connector location in Eaton Fuller transmission

STEP 1. Hubi joogo FMIs.

  1. Dib u eeg oo raaca digniinaha & ganaaxyada.
  2. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
  3. Key off.
    digniin: Eeg High-Voltage Service Shutdown and Power-Up Procedures. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  4. Waa kuwee FMIs joogaan?
    • Haddii Babaca Code 86 IMF 0 waxaa ku qoran, tag Tallaabada 2.
      • Haddii Babaca Code 86 IMF 16 waxaa ku qoran, baaritaanka waa complete. IMF 16 requires no action or replacement

STEP 2. Kormeer Filter PEC Air.

  1. Saar iyo kormeerto Filter Air * on tubada PEC iyo Screen Qiiqa ku Outlet PEC ah:
    • Haddii Filter Air iyo Screen Qiiqa nadiif ah oo xor ka ah haraaga burburka ayaa waxaa, tag Tallaabada 3.
    • Haddii Filter Air waa wasakh ama Screen Qiiqa waa shidan, bedeli Filter Air iyo nadiifiso Screen Qiiqa ah, ka dibna tag Tallaabada 6.

STEP 3. Hubi in PEC Fan shaqeeya.

  1. Key off.
  2. Connect ServiceRanger in Baarista 9-Jidka isku xira in cab ah.
  3. Key on.
  4. Tag "Baaritaano Product" oo dooro "Battery Fan Relay."
  5. Hubi hawada ka imanaysa dekedaha hawada hore iyo xagga dambe ee PEC ah:
    • Haddii hawada laga dareemi karaa Air PEC ah tubada iyo qiiqa, tag Tallaabada 5.
    • Haddii hawada aan la dareemi karo ka Air PEC ah tubada iyo qiiqa, tag Tallaabada 4.

STEP 4. Hubi danab waayo, circuit taageere on PEC 19-Jidka isku xira.

  1. Key on.
  2. Barkinta ku xira 19-Jidka at PEC ah.
  3. danab Cabbirka at 19-Jidka isku xira ka Pin 12 in Pin 14:
    • Haddii danab dhexeeya Pin 12 iyo Pin 14 waa ± 0.2 volts ee danab batari, badalo Carrier Power Electronics (PEC), ka dibna tag Tallaabada 6.
    • Haddii danab dhexeeya Pin 12 iyo Pin 14 waa ka baxsan kala duwan, cusboonaysiiyo circuit Battery Fan Relay. U dir ka OEM.

STEP 5. Hubi haddii code 106 IMF 29 waa Active aad.

  1. waa khalad Code 106 IMF 29 ku qoran Active?
    • Haddii Babaca Code 106 IMF 29 waa Active, badalo Carrier Power Electronics (PEC), ka dibna tag Tallaabada 6.
    • Haddii Babaca Code 106 IMF 29 waa Wax qabad la'aan, isticmaalaya ServiceRanger, tag "Functions Product Advanced" menu oo dooro "HCM" option. Download file Sawirka iyo xiriiri Eaton ee 1-800-826-HELP (4357).

STEP 6. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 86 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 86 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US