Hybrid Eaton Fuller Gudbinta Babaca Code 89 – BCU KARAA 1 Message (Gudiga sare)

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, oo aad cuneyso-6E606B-CD. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The Control Module Hybrid (Gudiga sare) ula xiriiraan Inverter wuxuu la xidhiidhaa Unit Control Battery ah (BCU) oo ku yaalla Power Electronics Carrier ah (PEC) iyo Gudiga sare ku Network Area maamusha (CAN) -Xawaaraha sare link xogta lahaansho. link xogta waa labada ciyaaryahan laba-silig a qaloocin la laba 120 Ohm resistors ku yaalla link.

khalad Code 89 – BCU KARAA 1 Message (Gudiga sare) ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Gudiga sare danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • Gaf HCM link xogta CAN waa qabad la'aan.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 9 ayaa lagu wadaa markii Gudiga sare waxa uu helin BCU a 1 fariin waayo, 30 wareegyada fariin isku xiga.

Uugu Marka Babaca Code 89 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Electric Motor / Generator la taageero iyo noolaynta naafada ah; si kastaba ha ahaatee, ee Relays a high-voltage sii powered.
  • Gudiga sii si loo xakameeyo gaariga Hybrid in hab naaftada kaliya.
  • la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 9
    • Inverter
    • KARAA Data Link ka PEC in Inverter
    • PEC

khalad Code 89 – BCU KARAA 1 Message (Gudiga sare) Test

Qeybta Aqoonsiga MY08 Systems:

HCM - Hybrid System Interface Connector

La habeeyo Front View
(Gudiga sare – Hybrid System Wajahadda isku xira)

Delphi 56-Way Mating Connector View

Delphi 56-Jidka isku xira rimay View
(Inverter – Isku xira danab Low)

Fuller transmission Deutsch 19-Way PEC Harness Connector View

Deutsch 19-Jidka PEC la habeeyo isku xira View

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

HCM Inverter PEC Connector

STEP 1. Hubi xaaladda code qalad Active iyo Wax qabad la'aan.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
  2. Qabtaan Pretest korontada iyo Hybrid korontada Pretest:
    • Haddii ay maya tahay arrimaha waxaa la helay intii lagu korontada ee Pretest Hybrid, tag Tallaabada 2.
    • Haddii arrinta waxaa cusboonaysiiyey inta lagu guda jiro korontada ee Pretest Hybrid, tag Tallaabada 4.

STEP 2. Hubi sii wareeggeedii PEC.

  1. Key off.
    digniin: Fiiri "Xiritaanka Service High-danab iyo Habka Power Up-". Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Goostay PEC 19-Jidka isku xira.
  3. Cabir iska caabin ah oo u dhexeeya PEC 19-Jidka isku xira Pin 1 iyo Pin 2:
    Note: Hubi in Waat / Ohm Meter waa on qiyaasta saxda ah (ku dhowaad 200 qiyaasta Ohm)
    Note: Si tartiib ah awooddiisa Inverter ee 56-Jidka isku xira la habeeyo dhow isku xira inta la socodka qiimaha caabiga.

    • Haddii iska caabin ah oo u dhexeeya Pin 1 iyo Pin 2 waa inta u dhaxaysa 50-70 ohms, bedeli Power Electronics Carrier (PEC), ka dibna tag Tallaabada 4.
    • Haddii iska caabin ah ka baxsan ee kala duwan, tag Tallaabada 3.

STEP 3. Hubi joogtada u dhaxaysa wareeggeedii Inverter iyo wareeggeedii PEC.

  1. Goostay Inverter 56-Jidka isku xira.
  2. Cabir iska caabin ah oo u dhexeeya:
    • Inverter 56-Jidka isku xira Pin 28 iyo PEC 19- Jidka isku xira Pin 2
    • Inverter 56-Jidka isku xira Pin 14 iyo PEC 19- isku xira Jidka 1 Note: Hubi in Waat / Ohm Meter waa on qiyaasta saxda ah (ku dhowaad 200 qiyaasta Ohm).
      • Haddii iska caabin ah oo u dhexeeya Pin 28 iyo Pin 2 waxaa inoo dhexeeya 0-0.2 ohms, iyo iska caabin ah oo u dhexeeya Pin 14 iyo Pin 1 waxaa inoo dhexeeya 0-0.2 ohms, bedeli Inverter, ka dibna tag Tallaabada 4.
      • Haddii iska caabin ah ka baxsan ee kala duwan, dayactirka CAN Data Link la habeeyo dhexeeya Inverter iyo PEC, ka dibna tag Tallaabada 4.

STEP 4. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 89 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 89 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US