Hybrid Eaton Fuller Gudbinta Babaca Code 89 – Power Electric Carrier CAN Message Babaca (Gudiga sare)

Khalad code for Hybrid Eaton daydo Systems Drive (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka. The Control Module Hybrid (Gudiga sare) ula xiriiraan Inverter wuxuu la xidhiidhaa Unit Control Battery ah (BCU) oo ku yaalla Power Electronics Carrier ah (PEC) iyo Gudiga sare ku Network Area maamusha (CAN) -Xawaaraha sare link xogta lahaansho. link xogta waa labada ciyaaryahan laba-silig a qaloocin la laba 120 Ohm resistors ku yaalla link.

khalad Code 89 – Power Electric Carrier CAN Message Babaca Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Gudiga sare danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.
  • Gaf HCM link xogta CAN waa qabad la'aan.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 2 is only Active in Product Diagnostic Mode (PDM) iyo nooc haddii 3 consecutive messages are not received by the HCM.
  • IMF 9 is set when the HCM has not received a 1 fariin waayo, 30 wareegyada fariin isku xiga.

Uugu Marka Babaca Code 89 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Amber "Check Hybrid" illuminates light.
  • Gaf waxa lagu kaydiyaa Control Module Hybrid (Gudiga sare) xusuusta.
  • Electric Motor / Generator la taageero iyo noolaynta naafada ah; si kastaba ha ahaatee, ee Relays a high-voltage sii powered.
  • Gudiga sii si loo xakameeyo gaariga Hybrid in hab naaftada kaliya.
  • la bixin kari Gudbinta bilaabi marsho in 1aad.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 2, 9
    • Inverter
    • KARAA Data Link in ay ku tiirsanaayeen Box
    • Tiirsanaayeen Box gudaha PEC
    • xoog ma jiro ama dhulka in ay ku tiirsanaayeen Box

khalad Code 89 – Power Electric Carrier Test Babaca Message CAN

Qeybta Aqoonsiga MY09 Systems:

mating connector Deustch 19-way
Inverter Deutsch 40-Pin connector

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

Inverter to PEC

Ama CAN optional si toos ah banki ay lafta dhabarka CAN Data Link (Inverter musmaarradii 34 iyo 35 looma isticmaalo):

Inverter to PEC CAN Backbone

STEP 1. Hubi xaaladda code qalad Active ama qabad la'aan iyo hubi gaadmada ah HCM.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
  2. Qabtaan korontada Pretest iyo Hybrid korontada Pretest.
    • Haddii ay maya tahay arrimaha waxaa la helay intii lagu jiray baadhitaanka labada korontada, tag Tallaabada 2.
    • Haddii arrinta waxaa cusboonaysiiyey waqtiga baaritaanka labada korontada, tag Tallaabada 10.

STEP 2. Hubi sii wareeggeedii PEC.

  1. Key off.
    Danger: Eeg Xiritaanka Service High-danab iyo Habka Power Up-. Raac habraaca si looga fogaado filaan ah, gubaan ama dhimasho ka khaldan u maareeyeen a high-voltage.
  2. Goostay PEC 19-Jidka isku xira.
  3. Cabir iska caabin on PEC 19-Jidka OEM Wire la habeeyo isku xira Pin 1 iyo Pin 2:
    Note: Hubi volt / meter Ohm waa on qiyaasta saxda ah (ku dhowaad 200 qiyaasta Ohm).

    • Haddii iska caabin ah oo u dhexeeya Pin 1 iyo Pin 2 waa inta u dhaxaysa 50-70 ohms, tag Tallaabada 3.
    • Haddii iska caabin ah ka baxsan ee kala duwan, tag Tallaabada 7.

STEP 3. Hubi circuit CAN soo gaabiyo dhulka.

  1. Cabir iska caabin ah oo u dhexeeya PEC 19-Jidka OEM Wire la habeeyo isku xira Pin 1 iyo dhulka iyo inta u dhaxaysa Pin 2 iyo dhulka:
    • Haddii mid iska caabin ah waa 0-100 ohms, cusboonaysiiyo OEM koronto KARAA circuit. tag Tallaabada 10.
    • Haddii labada resistances waa 7k ohms, tag Tallaabada 4.

STEP 4. Hubi CAN waxaa ku nool in ay sax xira Pin.

  1. Cabir iska caabin ah oo u dhexeeya PEC 19-Jidka isku xira Pin 1 iyo Inverter 40-Jidka isku xira Pin 4:
    • Haddii iska caabin ah waa 0-0.3 ohms, tag Tallaabada 5.
    • Haddii iska caabin ah waa 60 ohms, dayactirka taararka KARAA (hi oo ku yar yihiin khalad banki), ka dibna tag Tallaabada 10.

STEP 5. Hubi xoog iyo dhulka inay PEC.

  1. Dib 40-Jidka isku xira garoonka Inverter.
  2. Key on.
  3. Measure for voltage on PEC 19-Way OEM Wire Harness Connector Pins 6 iyo 7:
    • Haddii musmaarradii 6 iyo 7 have battery voltage (12 volts +/ – 1.2 volts), bedeli PEC ah, ka dibna tag Tallaabada 10.
    • Haddii musmaarradii 6 iyo 7 lahayn danab ama ka yar 1.2 volts ee danab batari, tag Tallaabada 6.

STEP 6. Hubi joogtada u dhaxaysa Inverter iyo PEC.

  1. Key off.
  2. Ka saar Inverter 40-Jidka isku xira.40 isku xira pin in inverter gudbinta buuxda Eaton
  3. Cabir iska caabin on OEM 40-Jidka isku xira Inverter Pin 14 si OEM 19-Jidka isku xira PEC Pin 6 iyo Inverter isku xira Pin 15 si PEC isku xira Pin 7: 19 pin isku xira-40-pin-xira
    • Haddii iska caabin ka Pin 14 in Pin 6 waa 0-0.3 ohms, iyo iska caabin ka Pin 15 in Pin 7 waa 0-0.3 ohms (sidoo kale hubi xiisad terminal on biinanka), bedeli Inverter ah, ka dibna tag Tallaabada 7.
      ?? Haddii iska caabin ah waa OL ama ka baxsan kala duwan, cusboonaysiiyo OEM Wire la habeeyo dhexeeya Inverter iyo PEC, ka dibna tag Tallaabada 10.

STEP 7. Hubi CAN ee PEC la Inverter.

  1. Key off.
  2. Ka saar Inverter 40-Jidka isku xira.40 Jidka isku xira in inverter
  3. Hubi OEM Inverter isku xira waayo, biinanka 34 iyo 35. Haddii ay maya tahay musmaarradii waxaa ku nool in isku xira, CAN PEC ee Isgaarsiinta tagaa ay lafta dhabarka CAN, ma Inverter ah:
    • Haddii Pin 34 iyo Pin 35 ma yihiin dadka, tag Tallaabada 9.
    • Haddii OEM Inverter isku xira ayaa musmaarradii 34 iyo 35, tag Tallaabada 8.

STEP 8. Hubi joogtada u dhaxaysa wareeggeedii Inverter iyo wareeggeedii PEC.

  1. Cabir iska caabin ah oo u dhexeeya Inverter 40-Jidka isku xira Pin 34 iyo OEM 19-Jidka isku xira PEC Pin 1 iyo Inverter 40-Jidka isku xira Pin 35 iyo PEC 19-Jidka isku xira Pin 2:19 pin isku xira-40-pin-xiraNote: Hubi volt / meter Ohm waa on qiyaasta saxda ah (ku dhowaad 200 qiyaasta Ohm)
    • Haddii iska caabin ah oo u dhexeeya Pin 34 iyo Pin 1 waxaa inoo dhexeeya 0-0.3 ohms, iyo iska caabin ah oo u dhexeeya Pin 35 iyo Pin 2 waxaa inoo dhexeeya 0-0.3 ohms, bedeli Inverter ah. Eeg saarista MY09 Inverter iyo Rakibaadda), ka dibna tag Tallaabada 10.
    • Haddii iska caabin ah waa OL ama ka baxsan kala duwan, cusboonaysiiyo OEM Wire la habeeyo dhexeeya Inverter iyo PEC, ka dibna tag Tallaabada 10.

STEP 9. Hubi joogtada u dhaxaysa CAN PEC iyo laf-CAN.

  1. Haddii inverter xira 40-pin uusan lahayn biinanka 34 iyo 35 ka dibna dadku laan isgaarsiinta CAN si 19-Jidka isku xira ee PEC waxaa si toos ah banki ay lafta dhabarka CAN:
    • Dayactir OEM Wire la habeeyo dhexeeya PEC iyo laf-Communication CAN ah, ka dibna tag Tallaabada 10.

STEP 10. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 89 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 89 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US