Hybrid Eaton Fuller Gudbinta Babaca Code 97 – PTO Engagement

Khalad code for Hybrid Eaton daydo Systems Drive (MY08) Cuneyso-8E306A-U, Cuneyso-8E306A-UPG, Cuneyso-8E306A-UP, Cuneyso-8E306A-CD, Cuneyso-8E306A-T, Cuneyso-6E606B-CD, (MY09) Cuneyso-8E406A-U / P, Cuneyso-8E406A-UP, Cuneyso-8E406A-UPG, Cuneyso-8E406A-CD, Cuneyso-8E406A-CDG, Cuneyso-8E406A-guud, Cuneyso-8E406A-T, Cuneyso-6E706B-CD, Cuneyso-6E706B-P iyo aad cuneyso-6E706B-UPG. Read hoose si aad u bartaan sida si ay u tijaabiso, nadiifiso iyo hagaajin qalad code qalad aad Freightliner, Mack, Peterbilt, Kenworth, Volvo, International, iyo gaari xamuul culus-waajib iyo qalabka.

PTO waa rakibo ah optional on gudbinta. PTO ay ka badan tahay koronto-hawada unit ah. PTO waxaa gacanta midkood by Control Module ku Hybrid (Gudiga sare) or the Body Controller. Note: Gaf waxaa loo dhigay oo keliya haddii Gudiga sare waxaa si toos ah banki ayaa si thePTO. Tani waxay la go'aamin karaa by hubinta qaabeynta HCM. The "celinta PTO" akhriyi doonaa analog.

PTO HCM-kontoroolo:

Gudiga ayaa gacanta ku PTO energizes solenoid korontada iyo cadaadiska hawada ku lug PTO ah. signal warcelin PTO waa signal 12-volt a. Ka yar 1 volt muujinaysaa PTO ugu hawlan, iyo ka weyn 3 volts muujinaysaa PTO la goostay.

Body maamusha PTO Operated:

Maamusha Body The shaqeeya PTO energizes solenoid korontada iyo cadaadiska hawada ku lug PTO ah. Marka user ay doorteen ikhtiyaarka ePTO ku Control Module ku Hybrid (Gudiga sare) tuseysa codsi u maamusha Body ah si aad u bilowdo PTO ah. Marka PTO ugu hawlan, Maamusha Body dib ugu diraysaa fariin xaqiijin ah.
Note: When determining which module is controlling the PTO, xirmaan ServiceRanger iyo aragto "gaadmada ah" screen. Under ah "Control Module Hybrid" waa liiska for celinta PTO, kaas oo la mid Analog la ilaaliyo (Gudiga sare), ama J1939 la ilaaliyo (Body maamusha). The "PTO qeybgelinta" Halbeegga bixisaa talooyin ka HCM ama maamusha Body ku saabsan xaaladda ay ku sugan PTO ah. Halbeegga waxaa lagu heli karaa in ka yar ServiceRanger Data Monitor liiska "Hybrid ePTO".

khalad Code 97 – PTO Engagement Ogaanshaha

The shuruud soo socda waa in la buuxiyaa ka hor inta nidaamka ogaadaa gardarrada:

  • Control Module Hybrid (Gudiga sare) danab suuroggalaan waa ka weyn yahay 7 volts iyo ka yar 16 volts.

Note: Marka dhib code ah Wax qabad la'aan tixraac ah Product Baarista Mode (PDM)

Xaaladaha in Calan Babaca Code Active

  • IMF 3 ayaa lagu wadaa markii Gudiga sare ee ogaadaa gaaban si VBATT ku soo wareegi jiray gacanta PTO ah.
  • IMF 4 ayaa lagu wadaa markii Gudiga sare ee ogaadaa gaaban dhulka soo wareegi jiray gacanta PTO ah.
  • IMF 5 ayaa lagu wadaa markii Gudiga sare ee ogaadaa furan wareegi jiray gacanta PTO ah.
  • IMF 7 ayaa lagu wadaa markii Gudiga sare ee ogaadaa gudbinta waa in dhex-dhexaad ah iyo, haddii ka dib 8 seconds ka codsanaya hab PTO PTO ku hawlan signal akhriyaa "goostay."
  • IMF 14 ayaa lagu wadaa markii doorasho ePTO ku Button ka murugeeysan dib ugu wareejin Control la doorto iyo Gudiga sare ee ogaadaa gudbinta ma aha in dhex-dhexaad ah oo ku salaysan wax soo saarka xawaaraha usheeda dhexe.

Uugu Marka Babaca Code 97 ayaa lagu wadaa shuruudaha soo socda dhici:

  • Gaf waxa lagu kaydiyaa xasuusta HCM.
  • Haddii PTO ugu hawlan iyo gardarrada dhacdaa, PTO ayaa weli ku hawlan arrinta ilaa codsi ePTO isbedelka, ama cadaadiska hawada hoos uga dhaco a
    xadka set.
  • Haddii PTO uusan ku hawlan soo widhwidha iftiin ePTO on Shift Button ka murugeeysan dib u Console.

Xaaladaha in Calan Babaca Code qabad la'aan

Kaliya unu qabad la'aan la nadiifiyay karaa Unit Gudbinta Electronic Control ah (TECU) ama taariikhda HCM isticmaalaya ServiceRanger. TECU ayaa si toos ah oo ansixiyay unu ka dib markii taariikhda 200 saacadood iyo HCM si toos ah oo ansixiyay unu ka soo taariikhda ka dib qalad uu Wax qabad la'aan, waayo, 200 saacadood.

code qalad Tani waxaa keeni kara wax ka mid ah kuwan soo socda:

  • IMF 7:
    • PTO Air Solenoid
    • cadaadiska hawada Low
    • fiilooyin circuit gacanta PTO
    • PTO
    • circuit warcelin PTO
    • PTO Ball Switch

khalad Code 97 – Imtixaanka PTO Engagement

Aqoonsiga Qeybta:

Hybrid Control Module

1. Control Module Hybrid (Gudiga sare)
2. Nut (3)
3. 38-System Jidka isku xira koronto-in
4. 38-Jidka isku xira Vehicle koronto-in
5. sii kordhaya Plate

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY08

FIIRO GAAR AH: U dir ka Eaton Qeybta Hybrid oo isku xira Location waayo, Goobaha isku xira in Systems MY09.

STEP 1.Verify FMIs joogo.

  1. Ceshano codes qalad Active iyo FMIs la ServiceRanger isticmaalaya Baarista 9-Jidka isku xira ama gacanta.
  2. Key off.
  3. Waa kuwee FMIs joogaan?
    • Haddii Babaca Code 97 IMF 3 waxaa ku qoran, tag Tallaabada 2.
    • Haddii Babaca Code 97 IMF 4 ama 5 waxay ku qoran yihiin, tag Tallaabada 3.
    • Haddii Babaca Code 97 IMF 7 waxaa ku qoran, tag Tallaabada 6.
    • Haddii Babaca Code 97 IMF 14 waxaa ku qoran, la xiriir Eaton ee 1-800-826-HELP (4357).

STEP 2. Hubi saarka danab ee HCM 38-Jidka.

  1. Key off.
  2. Barkinta cable ka batari negative.
  3. Barkinta la habeeyo Gudiga sare ee 38-Jidka isku xira.
  4. Key on.
  5. Measure the voltage from Pin 34 si ay dhulka ku HCM la habeeyo 38-Jidka isku xira:
    • Haddii danab ka Pin 34 si ay dhulka waa 0 volts, bedeli Control Module ku Hybrid (Gudiga sare)
      (oo kaliya haddii code qalad waa Active), ka dibna tag Tallaabada 8.
    • Haddii danab ka Pin 34 si ay dhulka waa 11-13 volts, cusboonaysiiyo la habeeyo Nidaamka Hybrid for gaaban si batteriga, ka dibna tag Tallaabada 8.

STEP 3. Hubi sii PTO circuit solenoid.

  1. Key off.
  2. Barkinta cable ka batari negative.
  3. Barkinta 38-jidka HCM la habeeyo ee isku xira.
  4. Measure the resistance between the HCM Harness 38- Isku xira Jidka iyo musmaarradii soo socda:
    • pin 34 in Pin 6
    • pin 34 si ay dhulka
      • Haddii iska caabin ah oo u dhexeeya Pin 34 iyo Pin 6 waa 0-0.3 ohms iyo iska caabin ah oo u dhexeeya Pin 34 iyo dhulka waa 10km ohms ama ka weyn, bedeli Control Module ku Hybrid (Gudiga sare) (oo kaliya haddii code qalad waa firfircoon). Tag Tallaabada 8.
      • Haddii iska caabin ah waa out of kala duwan, tag Tallaabada 4.

STEP 4. Cabir iska caabin ah la habeeyo Gudiga sare ee dhulka.

  1. Key off.
  2. Barkinta PTO 2-jidka isku xira garoonka PTO ah.
  3. Cabir iska caabin ah u dhexeeya isku xira PTO 2-Jidka at musmaarradii soo socda:
    • Pin A si Pin B
    • Pin A dhulka ku
      • Haddii iska caabin ah oo u dhexeeya Pin A iyo B Pin waa 0-0.3 ohms iyo iska caabin ah oo u dhexeeya Pin A iyo dhulka waa 10km ohms ama ka weyn, cusboonaysiiyo la habeeyo Nidaamka Hybrid for furan ama gaaban dhulka, ka dibna tag Tallaabada 8.
      • Haddii iska caabin ah ka baxsan ee kala duwan, bedeli Switch PTO ah, ka dibna tag Tallaabada 8.

STEP 5. Hubi Active FMIs

  1. Haddii Babaca Code 97 IMF 3, 4, ama 5 waa Active:
    1. Tag Tallaabada 1.

STEP 6. danab Cabbirka at Wire Signal dhulka.

  1. Barkinta PTO signal hal silig ee PTO ah.
  2. Key on.
  3. Measure the voltage from the PTO Signal Wire Connector to ground:
    • Haddii danab waa 12 volts ee muhiimka ah oo ku saabsan, problem is with the faulty PTO engagement signal switch in the PTO. La xiriir OEM waayo nidaamka dayactirka.
    • Haddii danab uu ka yar yahay 1 volt ee muhiimka ah oo ku saabsan, tag Tallaabada 6.

STEP 7. Hubi sii on PTO silig signal.

  1. Key off.
  2. Barkinta cable ka batari negative.
  3. Barkinta la habeeyo Gudiga sare ee 38-Jidka isku xira.
  4. Measure the resistance from the HCM Harness 38- Jidka isku xira Pin 18 ilaa ugu dambaysta PTO soo horjeeda ee Wire Signal.
    • Haddii iska caabin ka Pin 18 ilaa dhammaadka PTO ee xarigga signalka waa 0-0.3 ohms, bedeli Control Module ku Hybrid (Gudiga sare), ka dibna tag Tallaabada 8.
    • Haddii iska caabin ah ka baxsan ee kala duwan, cusboonaysiiyo furan ee silig signal PTO ka HCM si PTO ah, ka dibna tag Tallaabada 8.

STEP 8. Hubi dayactirka.

  1. Key off.
  2. Xidhmaan oo dhan Xidhiidhiyayaasha iyo cable ka batari negative.
  3. Key on.
  4. codes Clear, arki Unu qabad la'aan Clear.
  5. Wado baabuur iyo isku dayaan in ay dib code ka.
  6. Hubi codes, arki View unu Active iyo Wax qabad la'aan.
    • Haddii codes ma, baaritaanka waa complete.
    • Haddii Code qalad 97 u muuqataa, heli qalad in imtixaanka, tag Tallaabada 1.
    • Haddii code kale oo aan ahayn 97 u muuqataa, arki Khalad List Code Index.

Qof kasta oo gudbinta qayb aad u baahan tahay aynu u leeyihiin! maalin isku mid ah maraakiibta la heli karo, dunida oo dhan.

U BAAHAN TAAGEERO FREE KA MID khubaro OUR?

WAC NOW
email US